How to Clean Tile Joints? Step by Step Guideline

Spread the love

Cleaning tile joints can be one of the great challenges we face when doing home cleaning. Tiles in all types of installations always tend to accumulate dirt, mold and microorganisms.

So, you do not have to spend hours scrubbing the joints of the kitchen tiles or the tiles of your bathroom. In this article, we will give you some tricks so that you can clean the tile joints more easily, with the products that you have in your home. Remember that before you start cleaning the tile joints, you must sweep the surface or wipe with a dry cloth to remove the dust.

How to clean tile joints?

Follow these tricks to clean the tile joints and we guarantee that they will look like new:

how to clean tile joints

1. Baking soda, an ally to clean the kitchen and bathroom tiles

This mineral has hundreds of applications that help cleaning the home. Cleaning the tile joints with baking soda will help remove dirt and sticky grease. Also, with this element, you will neutralize bacteria.

To clean the bathroom and kitchen tiles, you must moisten the baking soda in hot water to create a thick paste. Next, you are going to cover the tile joints with this paste and rub it with a brush. After doing this, you will wait approximately half an hour, and remove the baking soda with a cloth.

2. Vinegar helps you clean tile joints

The white vinegar or apple is a highly popular product because it supports for various cleaning tasks at home. It has anti-fungal, antibacterial and bleaching properties, and helps neutralize the musty odor. Thanks to this, white or apple cider vinegar is an ideal product for cleaning tile joints.

If you don’t have too much-accumulated dirt, mix half a cup or 125 milliliters of white vinegar in ¼ cup or 62 ml of warm water. Once you have the mixture ready, spray it on the joints of your tiles and let the preparation work for approximately 10 minutes. After this, rub with a brush or sponge and rinse with warm water and dry with a cloth.

To clean the joints of your tiles, you can also use apple cider vinegar. Unlike white vinegar. In this case, you will use 125 milliliters of water and 125 milliliters of apple cider vinegar. Then you will apply the mixture to the joints with a brush and wait 5 minutes. Then you can clean with a cloth soaked in hot water.

In case there is a lot of dirt accumulation or the stain is very difficult to remove, do not dilute the vinegar in warm water. Please apply directly to the joints, leave it to act for a few minutes and rub vigorously until the stain disappears.

3. Water with bleach or ammonia works as a joint bleach

Lye and ammonia are products that help you clean, bleach and disinfect the area where you apply them. They are one of the best options when there is too much accumulation of dirt because they are stronger substances. However, for this same reason, these products should be used with more care when cleaning to avoid accidents.

To start cleaning, you should mix 30 ml of bleach or ammonia in half a liter of warm water. Once you have mixed it, apply it with a sponge or spray on the joints that you want to clean with the preparation. You should let the bleach or ammonia work for 5 or 10 minutes. After this time, you can start scrubbing the joints with a brush and, when you see them spotless, you can rinse.

Keep in mind that you should never mix bleach and ammonia, as toxic fumes can be produced for your health. When you go to use these products to clean, wear gloves and masks. Avoid applying these products if children are present.

4. Baking soda, liquid soap and vinegar for whitening

If you have too much-accumulated dirt and want to clean the blackened tile joints, we recommend that you mix half a cup or 100 grams of baking soda, a tablespoon of liquid soap and 62 milliliters or ¼ cup of hydrogen peroxide. With this mixture, you can easily clean the stains from the tile joints, eliminate mold and create a barrier against fungi that prefer humid environments such as the bathroom.

To clean the joints, you will have to spray the mixture on the joints you want to clean. Then, you will have to wait and leave the preparation to work for at least 10 minutes. Finally, you will brush the bathroom or kitchen tiles and rinse.

5. Clean the tile joints with lemon

This citrus helps remove fat and get rid of stains. Don’t be afraid to use it if your tiles are colored, as this fruit won’t make them fade. Rather, it will make them look like new.

To clean the tile joints, you must squeeze the juice from one lemon. This can be diluted in water or applied directly. Once you have done this, you can start rubbing and you will notice how the dirt disappears. Finally, when you see that the tile joints are clean, you can rinse or wipe the lemon juice with a dry cloth.

With these tricks, it will be much easier to clean the joints of your tiles. Remember that there are specific products to clean the tiles in the kitchen, bathroom or anywhere in your home.

You may also like to read http://blogcat.co.uk/

Leave a Comment